Steel is strong, but without proper protection, even the highest quality metal can fall victim to Nigeria’s challenging climate. At Kenny Cee Steel Merchants, we supply industrial paints designed to protect your steel investment for years to come.

Why Paint Steel?

Steel, while incredibly strong, is susceptible to corrosion when exposed to moisture and oxygen. In Nigeria’s humid coastal environment, unprotected steel can begin to rust in months rather than years.

Proper painting:

• Prevents rust and corrosion

• Extends the lifespan of steel structures

• Improves appearance

• Reduces long-term maintenance costs

• Protects against chemical exposure in industrial settings

Types of Industrial Paints We Stock

1. Anti-Corrosion Primers
The foundation of any good paint system. These primers:

• Bond tightly to the steel surface

• Contain corrosion-inhibiting pigments

• Provide a perfect base for topcoats

• Are essential for outdoor structures

2. Alkyd Enamels
Versatile, durable paints for general industrial use. Perfect for:

• Structural steel

• Gates and railings

• Machinery and equipment

• Indoor and outdoor applications

3. Epoxy Paints
High-performance coatings for demanding environments. Ideal for:

• Chemical plants

• Marine applications

• Wastewater treatment facilities

• Areas with heavy abrasion

4. Zinc-Rich Coatings
The ultimate protection for steel in harsh environments. These coatings:

• Provide sacrificial protection (like galvanizing)

• Are perfect for coastal areas

• Offer exceptional longevity

• Are specified for critical infrastructure

5. Heat-Resistant Paints
Specialized paints for high-temperature applications. Used on:

• Exhaust systems

• Boilers and furnaces

• Industrial equipment

• Engine components

The Right Paint for Your Application

For Structural Steel Outdoors

• Anti-corrosion primer + alkyd enamel topcoat

• Provides excellent weather resistance

• Easy to apply and maintain

For Industrial Floors

• Epoxy floor coatings

• Withstand heavy traffic and chemical spills

• Easy to clean and maintain

For Marine Environments

• Zinc-rich primer + epoxy intermediate + polyurethane topcoat

• Maximum protection against salt spray

• Long service life in harsh conditions

For General Fabrication

• Direct-to-metal alkyd paint

• Good corrosion protection

• Cost-effective for most applications

Surface Preparation: The Key to Success

Even the best paint will fail if applied to poorly prepared surfaces. Follow these steps for lasting results:

Step 1: Clean the Surface
Remove all oil, grease, and dirt using solvents or degreasers.

Step 2: Remove Rust
Use wire brushing, grinding, or sandblasting to remove rust and mill scale. For best results, aim for a near-white metal finish .

Step 3: Profile the Surface
Create a slight roughness to help the paint adhere. Sandblasting is ideal, but sanding or etching primers can work for smaller projects.

Step 4: Apply Primer Immediately
Apply primer the same day as cleaning to prevent flash rust from forming.

Step 5: Apply Topcoats
After the primer dries, apply one or two topcoats for complete protection.

Application Tips for Best Results

✅ Check the Weather – Don’t paint in rain or extreme humidity
✅ Follow Temperature Guidelines – Most paints need temperatures above 10°C to cure properly
✅ Mix Thoroughly – Stir paints well before and during application
✅ Apply Even Coats – Avoid runs and sags by applying thin, even coats
✅ Respect Drying Times – Don’t rush; allow proper drying between coats
✅ Clean Up Properly – Use recommended thinners for equipment cleaning

Common Painting Mistakes to Avoid

❌ Painting Over Rust
Rust underneath will continue to spread, causing the paint to fail.

❌ Skipping the Primer
Primer provides adhesion and corrosion protection—don’t skip it!

❌ Applying Paint Too Thickly
Thick coats take longer to dry and are more likely to crack or peel.

❌ Painting in Direct Sunlight
Hot surfaces cause paint to dry too quickly, leading to poor adhesion.

❌ Ignoring Manufacturer Instructions
Always follow the technical data sheet for best results.

Why Kenny Cee for Your Industrial Paints?

✓ Quality Products – We stock paints that perform in Nigerian conditions
✓ Expert Advice – Our team helps you select the right paint for your project
✓ Complete Range – Primers, topcoats, and specialty coatings all in one place
✓ Competitive Pricing – Good value for quality products
✓ Convenient Location – Easy access at Iyana Ipaja

Protect your investment with quality paints from Kenny Cee Steel Merchants.

Visit us: 161, Abeokuta Express Way, Beside Access Bank, Iyana Ipaja, Lagos State
Call: 0803 803 7098 | 0818 906 9075
WhatsApp: 0801 3330 4250
Email: sales@kennyceegroup.com.ng